R Coat 3000
Home > Products > COATINGS- LADLE AND MOLD > R COAT 3000 > R Coat 3000
Part Number: DKS-R3000
Availability: 2-3 days
R-Coat 3000 is a protective coatings that may be applied to ingot molds, sow molds, ladles, thermocouple tubes and other ferrous surfaces to prevent molten metal adhesion at temperature up to 2000F. R-Coat is a water-based mixture blended with a special additive to ensure a bright, smooth coating
APPLICATION
R-Coat 3000 should be thoroughly stirred before use. Clean the surface of all previous coatings, rust,
grease, etc. This product can be diluted with water and applied by dipping, brushing or spraying. Do
not overcoat: too much will cause flaking or cratering. Two light coats produce better results than one
D I L U T I O N R A T I O S
Ingot Molds.................................................. 3 parts water to 1 part concentrate
Hand Ladles...................................................1 part water to 1 part concentrate
Automatic Ladles...........................................1 part water to 1 part concentrate
Thermocouples..............................................1 part water to 1 part concentrate
Troughs...........................................................1 part water to 1 part concentrate
Weight: 10.00 lbs